Ant Power Meter

CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX

CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX

CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX   CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX
This advert is a multi-listing. Please select the size you require from the drop down menu. Always a Paragon of Service. With Over 19,000 +ve feedbacks.

Working with protection tape since 1993. Invisible Matte Paint Protection Tape.

This Matte tape has a smooth surface and continuous adhesive. To give the best possible'look' on matte/satin/anodized/brushed finishes.

Turns any standard gloss part into a matte part if thats what you need ;. You will avoid the dreaded glossy patch look with this tape if you have any. Part that is Matte, anodized, satin, brushed or has a dull finish. This Matte/Satin tape has a clear frosted glass type effect to copy a matte/satin/dull paint job. It shows through whatever colours lay under it.

Cars/Motor bikes/Yacht's & boats/Bikes/Jetskis/kayaks/ski's & many other vehicles/components etc. Self adhesive paint protection tape. Just pull back the backing layer to expose the adhesive. The backing layer can be clear - white or other colours. If it is clear it will be hard to see but flick the backing off at one corner to expose.

Double wrap the tape for extra protection in vulnerable areas. The tape will still be invisible even if you add more layers but be easier to apply than super thick aviation tapes. No need to worry about being in for the postman. The tape comes pip boxed up in 1 length.

500mm x50mm are sample sizes and these are supplied flat packed & cut up - see photo of this selection. Shorter, longer & narrower sizes also an option in my other listings or. If you don't see what you want. Easy to cut up into the sizes & shapes you want.

19,000 happy e-bayers have bought tape from ParagonTapes. Check out feedback comments thousands of ebayer's can't be wrong. Don't just take my word for it.

See these & all other. The best place for tape, matte or gloss. Sent fast, good price, great finish. Very happy with the result. Great item - really impressed! Brilliant, better than expected, first class service.

Returning customer, best protective tape for bikes by far. Great product used on my mtb bike.

Good quality tape and arrived quickly. Spot on, a real bargain compared to others available too. Good stuff, easy to apply and hardly visible. Brilliant tape for bikes - better than 3M. Good gear, easily as good as lizard skin without the price. Excellent product, easy to use, well packaged and good value service. Just as described, many thanks. Very pleased goes on a treat little warm of airdryer and can't tell it there. Excellent product, used hair dryer went on to my MTB frame perfectly. Great product, taped my bike frame and you wouldn't know it was there! Easy to cut and adheres well to frame! Why risk it anywhere else?? Total Thickness with backing layer 0.22mm /. Thickness 0.12mm / 120microns / 4.7mils.

Tensile strength 177N / 25mm. Peel Adhesion 7.0N / 25mm. (the harder you press it down the better).

Manufacturing tolerances are +/- 10% including size. Suitable for interior or exterior use. Easy removal with no glue left behind. Easy to manipulate around curves.

Always fit the tape in a closed space (garage). Avoid any draughts or wind from open doors/windows this can cause debits on the adhesive. Ideal tape application temperature r ange is 21. ºC is not recommended because the adhesive becomes firm.

Clean the surface and remove all wax - polish - oils - dirt etc. Make sure all debits - dust - hairs - bits - fluff etc are removed just before fitting the tape.

Roughly cut the tape to the size required. The tape has a backing layer to protect the adhesive, just flick it off and peel from a corner. Due to atmospheric conditions the vinyl can expand/shrink, this can cause the backing to wrinkle this does not effect the vinyl. The tape can be easily formed / stretched around tight curves using a heat gun.

The adhesive is heat and pressure sensitive so the more you heat and press down the tape the better it will stick. The tape is easily applied either dry for small pieces or with a mix of water & 5% fairy liquid for very large pieces.

For small pieces pull the backing layer off and'roll' the tape down into position, making sure you avoid trapping air bubbles under the tape. For much larger pieces spray the item you are taping, remove the adhesive backing layer and spray the adhesive. You can slide the tape around as long as you have sprayed enough liquid on the adhesive side of the tape. When the tape is in the correct position you can squeegee the liquid from under the tape removing all the air bubbles. The tape will now be stuck into position.

These instructions won't be supplied printed to save paper and resources you can copy/paste/print if required. Don't apply in cold conditions, let the tape & item warm up before fitting and remove any condensation. Don't try to fit large pieces until you get the hang of applying smaller pieces first.

Don't try to fit complex curves and shapes until you can apply easier pieces first. Don't expect too much from one piece - Use multiple smaller pieces rarer than one big piece. Using a heat-gun will enable the tape to be stretched round complex curves. Apply the tape bit by bit - heating & laying the tape down as you go. Don't leave small'lip edges' of tape bent over edges, you need at least 10mm over the edge for the adhesive to stick. Check YouTube for extra tips - type. Applying bike frame protection' into the search bar. If you do the above it will stay stuck for years without issue - over. Have done it OK as feedback shows. If you fail to prepare and rush in, it will not work as well and look like a bodge job. This is not the fault of the tape. Items will be posted on weekdays (Mon-Fri). Any changes to the address after the checkout process will not be considered as valid so make sure your address is correct and up to date. You need to message us to confirm you wish to cancel within this 14 day timeframe. The item must NOT be used, worn or damaged, and must be in new condition when received back to us.

The item must be securely packed to ensure it is received back in re-sale-able condition. Photos may be requested in this return process. The return cost of faulty or damaged items will be meet by us. If you fail to follow the instructions & tips, it will not work out well.

Air bubbles under the tape, creases in the tape & lifting edges are examples of bad application methods. Over 19,000 have applied without issue so shows it is easy to do as the feedback indicates. If you feel you have a problem with your order, please get in touch. We aim to resolve any issues or concerns you may have.

The item "CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX" is in sale since Thursday, February 7, 2019. This item is in the category "Sporting Goods\Cycling\Bicycle Electronics\Power Meters". The seller is "paragontapes" and is located in Scarborough.

This item can be shipped to United Kingdom.

  • Sport/Activity: Cycling
  • Type: Crank Arm
  • Features: ANT+
  • MPN: Does Not Apply
  • Brand: Unbranded

CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX   CLEAR MATTE Bike Frame PAINT Protection Tape Heli film Carbon TT Track Fixed BMX