In contrast to other power meters, the sensors of the Vector 3 are located directly in the pedals, so that you receive reliable data with every workout. Better training planning with cycling dynamics. With the Vector 3 system with dual sensor, the power of the right and left leg is saved independently of each other. The Vector 3 measures total power, cadence and power distribution from left and right as well as advanced cycling dynamics so that you can adapt your training to your personal weaknesses and strengths in order to improve your performance.The device also saves when and how long you spent standing or sitting. This allows conclusions to be drawn about the effectiveness of the respective position. You can also see the power phase, which shows you when the positive driving force begins and ends in the pedaling cycle. The Platform Center Offset indicates where the force is applied to the pedal, so you can be sure that the cleat is correctly positioned. Easily assembled, changed and used. With the Vector 3 you don't have to remove or reassemble any other components and you save the installation of additional sensors. Therefore, the Vector 3 is installed like any other pedal. Mounting it on different bikes is also very easy - without the help of a bike dealer. Ergonomics was also considered during development, and the shapely design offers sufficient space in the curve and has a good shaft height. The precision-made stainless steel axle and the composite pedal body have been specially manufactured and tested for durability. The device has a battery life of up to 120 hours. Your training will be even more effective if you use the Vector 3 with compatible Edge bike computers, ANT + or Bluetooth-enabled fitness equipment. Including compatible Forerunner and fenix devices, and the Garmin Connect Mobile app. These devices also allow easy software updates. Garmin Connect will come after the workout. Strava and TrainingPeaks come into play. There you can analyze your data, share it with others, display it on a map, plan routes and more.
Use ANT + connectivity for better results by pairing the Vector 3 device with TrainerRoad. The TrainerRoad app provides individually adapted indoor training sessions based on performance data from the Vector 3.The indoor training system also has training plans with detailed instructions on how to achieve your specific fitness and competition goals. This is what structured training looks like at its best. And don't wait any longer to get faster. The first 30 days are free! The specifications contain information about data that can be viewed on compatible devices. WARNING: Cyclists using the Vector system must weigh a maximum of 105 kg (231 lbs). If the maximum weight is exceeded, personal injury or property damage can occur. And the Bluetooth logos are owned by the Bluetooth SIG, Inc. And any use of such marks by Garmin is under license. Battery type: LR44 / SR44 (4 pieces). Battery life: up to 120 hours. Maximum weight of the driver: 105 kg. Q factor: 53 or 55. Shaft height: 11.5 mm. Free space in the curve: 80.5 cm (31.7 in). Commercial register: Duisburg HRB 16469. With the Vector 3 you don't. The item "Garmin Vector 3 Pedal-Wattmess-System, Powermeter" is in sale since Thursday, July 29, 2021. This item is in the category "Sporting Goods\Cycling\Bicycle Electronics\Power Meters". The seller is "s-tecsports" and is located in Schermbeck.
This item can be shipped to all countries in Europe.